Chain Lock Fitment - Royal Enfield Bullet 500 Owner's Manual

Bullet 500 royal enfield
Hide thumbs Also See for Bullet 500:
Table of Contents

Advertisement

MINOR MAINTENANCE TIPS
REAR BRAKE PEDAL PLAY ADJUSTMENT
Turn in or out the adjuster nut at the brake rod end.
The recommended brake pedal travel is 20-30 mm.
Check that the brake is not binding and the rear
wheel rotates freely.
WARNING
Please ensure brakes are adjusted to their maximum
efficiency. Inefficient brakes can cause an accident.
Please ensure adequate caution while applying brakes.
Sudden application OR pressing the levers fully can caused
the wheels to lock. This may cause the motorcycle to skid
with possible loss of control and result in an accident
causing. Brake shoes must be inspected for wear every 4000
Kms. If you ride under adverse conditions, (steep hills,
heavy traffic, etc.) a more frequent inspection at 1600 Kms
or less, is required.

CHAIN LOCK FITMENT

20 - 30 mm
The open end of the chain link master lock to face
opposite to normal direction of chain rotation as
shown pic.
WARNING
The fitment in wrong direction lock can lead to
falling off of chain link thus disengaging the drive.
This wil l lead to potentiall y hazardous situati on
which, if not avoided, could result in serious injury.
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents