Royal Enfield Bullet 500 Owner's Manual page 69

COMPLETE WIRING DIAGRAM - BULLET 500
NOTE : Complete Wiring Diagram is attached on this page.
VEHICLE STARTING PROCEDURE
BASIC GUIDELINES TO BE FOLLOWED "FOR ALL ELECTRIC START VEHICLES"
1. In cold condition of the engine or for initial start, it is advised to use electric start (ES) only.
2. Apply choke in cold start condition. (ambient temperature <25° C)
3. DO NOT ATTEMPT – "HALF START" BY CASUALLY PRESSING ELECTRIC START BUTTON.
4. PLEASE PRESS AND HOLD ELECTRIC START BUTTON FOR ATLEAST 3 SECONDS CONTINUOUSLY FOR
THE CRANKING OR UNTIL THE ENGINE FIRES AND SUSTAINS, WHICHEVER IS EARLIER.
5. If engine doesn't start in the first attempt, release the ES button and repeat the above Procedure.
6. It is advised not to apply excessive throttle during starting.
68