Drive Chain Lock Fitment - Royal Enfield Continental GT Owner's Manual

Minor Maintenance Tips
f. Later adjust the nut on left side by matching
the index mark with respect to right side
index. Ensure that both the sides are in
same index marks.
g. Tighten the adj uster locknut by 13mm
spanner against chain slack adjusting nut.
h. Finally torque the spindle and axle nuts to
7 kgm.
Warning
Chain slackness beyond 30mm will lead to chain
slippage.
Maintain drive chain slackness within the specified
limits at every 1000 kms interval.
Please Check the front and rear wheels are correctly
aligned, after the chain adjustment.

DRIVE CHAIN LOCK FITMENT

If for any reason the chain link lock is removed, it should
be fitted such that the closed end of the lock is towards
the direction of the chain rotation. Please ensure the
chain lock is located properly in the chain link and is
locked in place.
Warning
Failure to adhere to this procedure will result in the chain
lock to fall off, cause the rear chain to snap and stop the
motorcycle abruptly. This if not avoided, can lead to a
potentially hazardous situation .causing an accident,
which could result in serious injury or loss of life.
57