End-User Access Windows - HP 800 User Manual

System Administration

End-user Access Windows

TIP:
CAUTION:
TIP:
15-18
End-user Access Windows
The end-user access windows are completely customizable. You can enter
general text through the NAC 800 interface and edit the file that contains the
messages that are returned to the end-user.
If you need more end-user access window customization than is described in
this Users' Guide, please contact ProCurve Networking by HP.
To edit the end-user access window logo and general text:
See "End-user Screens" on page 3-118.
To edit the end-user test results message text:
Command line window
See "Customizing Error Messages" on page 5-49.
Make changes to the description only. For example, in the following text:
"checkServicePacks.String.3" : "There are no service packs installed. Run
Windows Update to install the most recent service packs."
Do not make changes to the text at the beginning of the line: "checkService-
Packs.String.3" :
To view the end-user access windows:
IE browser window
Point the IE browser to port 88 of your NAC 800 ES. For example, if the IP
address of your NAC 800 ES is 10.0.16.18, point an IE browser window to:
http://10.0.16.18:88
If you would like to use a port other than 88, contact ProCurve Networking
by HP for assistance in making the necessary changes.