Testing The Service; Windows; Linux - HP 800 User Manual

Configuring the Post-connect Server

Testing the Service

A-10

Testing the Service

To test the post-connect service:
Command line
Enter the following at the command line:

Windows

/usr/local/postconnect/bin/Connector_ActionScript.py
<endpoint IP> "Reason 1" "Reason 2"

Linux

/usr/local/postconnect/bin/Connector_ActionScript.py
<endpoint ip> "Reason 1" "Reason 2"
Where:
<endpoint IP> is the IP address of an endpoint known to NAC 800. For
example, 192.168.40.40
"Reason 1" and "Reason 2" are text strings that describe the reasons to
quarantine the specified endpoint. For example, "P2P Software Installed", or
"Latest Windows XP Service Pack not applied".