Launching Post-Connect Systems - HP 800 User Manual

System Configuration
Post-connect
Figure 3-46. Post-connect Launch Window
3-102
a. Enter the user name of the account to be used for logging into the
post-connect service in the User name text field.
b. Enter the password of the account to be used for logging into the post-
connect service in the Password text field.
c. To help confirm accuracy, enter the same password you entered into
the Password text field in the Re-enter password text field.
Select the Notify administrators when a post-connect service quarantines an
4.
endpoint check box if you want administrators to be notified when a post-
connect service quarantines an endpoint. Notifications will be sent by
email from the enforcement cluster quarantining the endpoint in
accordance with its notifications settings.
Click ok to save your changes and return to the Home window.
5.

Launching Post-connect Systems

After you have configured a post-connect system, you must launch it before
NAC 800 can communicate with it.
To launch a post-connect system:
Home>>Post-connect
1. Click on the post-connect system name. A new browser window opens.
2. If you have not elected to automatically log in to this external system (see
step 3 above), you will be presented with that system's login window.