HP 800 User Manual page 397

NOTE:
NOTE:
2. In the Basic 802.1X settings area, select the remote Endpoint detection
location radio button.
Click ok.
3.
Command line window
Perform the following steps on each ES in your system.
4. Log in as root to the NAC 800 ES using SSH or directly with a keyboard.
5. Enter the following command:
egrep DeviceActivityCapture /usr/local/nac/
properties/nac-es.properties
The expected results are:
Compliance.DeviceActivityCapture.RunningRemotely=tru
e
It can take a minute or two Contact ProCurve Networking by HP ( ) if your
results are different.
It can take a minute or two after changing the property in the user interface
for the change to propagate to all ESs.
6. Edit the configuration file:
a. Open the following file with a text editor such as vi:
/etc/syslog-ng/syslog-ng.conf
b. In the ### SOURCE ENTRIES HERE ### area, add the following line:
source rdac
c. In the ### DESTINATION ENTRIES HERE ### area, add the
following line:
destination d_dac { program("/usr/local/nac/bin/
syslog-to-dac.py"); };
Remote Device Activity Capture
NAC 800 to Infoblox Connector
{ tcp(); };
12-21