HP 800 User Manual page 331

NOTE:
p. Click Next.
Figure 11-16. IAS, Remote Access Policy, Authentication Method
If you choose PEAP as your authentication mechanism in step q, see step 8
before completing step r and step s. Adding a certificate, if your server does
not already have one, and configuring PEAP is explained in step 8.
q. Select the EAP type from the drop-down list.
Important: The type selected here must match the type selected for
the endpoint described in step 5, step 7 on page 11-42.
r. Click Next.
Click Finish.
s.
8. The PEAP authentication method requires that a specific type of SSL
certificate is available for use during authentication. These steps assume
there is a Domain Certificate Authority (CA) available to request a
certificate.
Click Configure.
If you receive the error message shown in figure 11-7, complete these
steps to request a certificate.
802.1X Quarantine Method
Setting up the 802.1X Components
11-17