Post-Connect; Allowing The Post-Connect Service Through The Firewall; First Time Selection - HP 800 User Manual

Post-connect

Post-connect in NAC 800 provides an interface where you can configure
external systems, such as IDS/IPS, that request quarantining of an endpoint
based on activity that occurs after the endpoint has connected to the network
(post-connect).
Allowing the Post-connect Service Through the
Firewall
The firewall must be opened for each post-connect service that communicates
with NAC 800.
To open the firewall for your post-connect service:
Command line window
1. Log in to the NAC 800 MS as root using SSH or directly with a keyboard.
2. Enter the following command at the command prompt:
iptables -I INPUT -s<host> -m tcp -p tcp --dport 61616
-j ACCEPT
Where <host> is the external server IP address.

First Time Selection

The first time you select the Post-connect menu option, you are prompted to
configure your external system:
Home>>Post-connect
System Configuration
Post-connect
3-99