Foundry - HP 800 User Manual
Procurve network access controller 800
Hide thumbs
Also See for 800:
- User manual (560 pages) ,
- Manual (106 pages) ,
- Installation manual (34 pages)
Table of Contents
Advertisement
System Configuration
Quarantining, 802.1X
TIP:
3-76
9.
Enter the Reconnect idle time. This is the amount of time in milliseconds
that a Telnet/SSH console can remain idle or unused before it is reset.
10. Select the Show scripts plus symbol to show the following scripts:
•
Initialization script – The expect script used to log into the console and
enter enable mode.
Re-authentication script – The expect script used to perform endpoint
•
re-authentication.
•
Exit script – The expect script used to exit the console.
11. Click ok.
Click revert to defaults to restore the default settings.
Foundry
To add a Foundry device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine
method radio button>>Add an 802.1X device
Advertisement
Table of Contents
