HP 800 User Manual page 333

NOTE:
h. Open the Certificates folder under the Console Root.
Right-click on the Personal folder and select All Tasks>>Request New
i.
Certificate.
To import the certificate manually:
1. Right-click on the Personal folder>>select All Tasks>>Import.
2. When the wizard opens, click Next.
3.Enter the path to the NAC 800 certificate, for example:
D:\support\ias\compliance.keystore.cer
4.Click Next, Next, and Finish.
j. Follow the instructions to generate a certificate request. If there are
no certificate templates available you need to edit the certificate
template permissions (in mmc add the certificate template snap-in,
right-click on the template, select properties, and change the
permissions for your user) on the certificate authority. The Computer
or RAS and IAS templates both work.
k. Once the Certificate is granted by the certificate authority, return to
the IAS policy editor to continue the setup.
Click Configure to configure the certificate for use with the PEAP
l.
authentication method. The Protected EAP Properties window
appears (figure 11-18).
m. Select the certificate you created in the previous steps, select the EAP
types you want to use, and click OK.
n. Once the Certificate is granted by the certificate authority, edit the
IAS policy.
o. On the authentication tab click authentication methods.
p. Select PEAP and click Edit.
q. Select the new certificate and click Apply.
802.1X Quarantine Method
Setting up the 802.1X Components
11-19