Motion/Occupancy Sensor; Performance And Applications - KMC Controls FlexStat Application Manual

Bacnet programmable thermostats
Hide thumbs Also See for FlexStat:
Table of Contents

Advertisement

Motion/Occupancy Sensor

Performance and Applications

For any FlexStat model with a (passive infrared) motion/occupancy sen-
sor option, be sure to install it where it will have unobstructed view of
the most typical traffic area. Do not install it behind curtains or other
obstructions. Do not install it where it will be exposed to sunlight or
heat sources! Do not install near a heating/cooling duct.
For some applications, such as hotel rooms, bedrooms, and other
sleeping quarters, lack of detected motion may not truly mean "unoc-
cupied." Motion sensors coupled with door contacts can prevent such
undesired setbacks. If no motion is detected during a predetermined
time after a door opening/closing is detected, then the mode changes
to unoccupied. However, if motion is detected during the timed period
after a door has been opened/closed, then occupied mode shall remain
on until the next time a door is opened or closed (and the timed period
begins again). (Custom programming is required.)
The effective detection range is approximately 10 meters or 33 feet.
Factors that may reduce the range include:
• Too small of a difference in object surface temperature compared to
the background temperature.
• Object movement in a direct line toward the sensor.
• Very slow or very fast object movement.
• Obstructions.
False detections may be triggered by:
• The temperature inside the detection range changing suddenly
because of entry of cold or warm air from an air-conditioning or
heating unit.
• The sensor being directly exposed to sunlight, an incandescent
light, or other source of far infrared rays.
• Small animal movement.
FlexStat (General)
32.8 ft
X
(10 m)
32.8 ft
32.8 ft
Top View
X
(10 m)
(10 m)
NOTE: To maintain maximum
sensitivity, occasionally
wipe dust or dirt off
the lens—but do not
use any fluid on the
sensor.
55°
32.8 ft
(10 m)
22
32.8 ft
Top View
(10 m)
Motion/Occupancy
Detection
Performance
55°
32.8 ft
32.8 ft
(10 m)
(10 m)
32.8 ft
(10 m)
Side View
Y
°
46.5
Sensor
0
Side View
Y
°
46.5
Application Guide, Rev L

Advertisement

Table of Contents
loading

Table of Contents