Adjusting Playback Level (Dvd Level); Enjoying Better Pictures (Progressive) - JVC CA-UXQD9S Instructions Manual

Micro component system consists of ca-uxqd9s and sp-uxqd9s
Hide thumbs Also See for CA-UXQD9S:
Table of Contents

Advertisement

(Continued)
Convenient Functions of the DVD Player
Adjusting Playback Level
(DVD LEVEL)
The audio of a DVD VIDEO and DVD AUDIO may
be recorded at a lower level (volume) than for
other types of disc. You can adjust the DVD level.
■While a disc is being played back
Press
.
• Each time you press
toggles as follows in the display window.
: Sound level recorded in the
DVD.
: Enhances the sound level
(initial setting).
: Enhances the sound level to the
highest level.
• Select the level while listening to the
sound played back.
NOTE
• DVD level is effective only for playback of a DVD.
• Even if the DVD level is changed, the output
level from the digital audio output terminal will not
be changed.
• This function does not affect recording sound.
29
, the display
Enjoying Better Pictures
(PROGRESSIVE)
In the progressive mode, you can enjoy better
pictures.
CAUTION
• In order to enjoy pictures in the progressive mode,
the following requirements should be met.
• There must be component video input termi-
nals on the TV set connected to the main unit.
• The main unit and the TV set must be con-
nected using a component video cord
(
page 15).
When the above requirements are not satisfied,
leave the main unit in the Interlace mode. If the
progressive mode is set, pictures may be dis-
torted.
■While the disc is played back or paused
Hold down
.
• Each time you press
toggles as follows.
Interlace mode (initial setting)
Progressive mode
Introduction
, the display

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents