Quitting Recording; Recording Only One Track From A Disc; Recording The Second Or Subsequent Track To The Last Track From A Disc; Program Recording From A Disc - JVC CA-UXQD9S Instructions Manual

Micro component system consists of ca-uxqd9s and sp-uxqd9s
Hide thumbs Also See for CA-UXQD9S:
Table of Contents

Advertisement

(Continued)
Recording Sound to Cassette Tapes
3
Select a sound source for recording.
Sound source
Press
Disc
(The disc is stopped.)
Select the radio station whose broad-
Radio
broadcast
cast you want to record (
Sound from
other
Press
equipment
the other equipment (
(AUX)
4
Press
on the main unit.
Example: Display while CD sound is recorded
• When you record from a disc, all tracks are
recorded to the cassette tape.
• When you want to record sound from other
equipment, start playback on the connected
equipment.
• When recording finishes, the color pattern of
the display window and disc tray switches to
the color pattern set in "MANUAL" to inform
you that recording has finished (
18).

Quitting Recording

Press
.
Recording Only One Track
from a Disc
(Excluding DVD VIDEOs)
Before proceeding to step 4, play back
the track you want to record.
• Pressing
in step 4 returns playback to
the beginning of the track and only that track
is recorded.
45
Operation
, and then press
.
page 19).
and prepare playback on
page 43).
page
For the locations of remote control
buttons, refer to page 44.
Recording the Second or
Subsequent Track to the Last
Track from a Disc
(For a DVD VIDEO: while the disc is paused)
■For a CD/VCD/SVCD/DVD VIDEO
Before proceeding to step 4, select the
starting track/chapter number by
pressing
or
■For a DVD AUDIO/MP3/WMA
Before proceeding to step 4, select the
group number by pressing
, and then select the track num-
ber by pressing
Program Recording from a
Disc
Before proceeding to step 4, program
the tracks you want to record
(
page 31).
Recording with No Blank Time
between Tracks
Before proceeding to step 4, play back
a disc, pause the playback, and then
press
to return to the beginning
of the first track.
Erasing Recorded Sound
from a Cassette Tape
Select the sound from other equip-
ment (AUX) in step 3, and then press
.
• Do not play back any tracks on the
connected equipment.
NOTE
• If the cassette tape reverses direction while a track
is being recorded from a disc, this product starts
recording that track again from the beginning onto
the reverse side of the cassette tape. However, if
12 or less seconds of that track were recorded onto
the first side of the cassette tape, recording to the
reverse side of the cassette tape starts from the
beginning of the previous track.
Introduction
.
or
or
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents