JVC CA-UXQD9S Instructions Manual page 110

(Continued)
Using the Timers
8
Press .
9
Press or
sound source you want to play back.
Example: When you want to listen to an AM
broadcast
• When you want to listen to sound from other
equipment, you cannot use the playback
timer function to start playback on any
equipment other than this product.
• You cannot use the playback timer function
together with program playback, repeat
playback or random playback of a disc.
■When you want to listen to an FM/AM radio
broadcast
• (With "FM" or "AM" selected) Press
and then press
ber buttons to select the preset number
of the radio station whose broadcast you
want to listen to (
"Using the number buttons"
( page 16).
■When you want to play back a DVD VIDEO
or DVD AUDIO
• (With "DVD/CD" selected) Press
twice. Regardless of the displayed num-
bers of group (G) and track (T), you can
play back a DVD VIDEO or DVD AUDIO
only from the beginning of the disc.
■When you want to play back a CD, VCD or
SVCD
• (With "DVD/CD" selected) Press
twice, and then press
number buttons to select the number of a
track (T) from which you want to start
playback. Refer to "Using the number
buttons" ( page 16). The group
number (G) is ignored.
■When you want to specify a track from
which you want to start playback on an MP3
or WMA
• (With "DVD/CD" selected) Press
press ,
to select the group number (G) to be
played back, press
, or the number buttons to
select the track number (T) to be played
back. Refer to "Using the number
buttons" ( page 16).
49
to select the
,
, or the num-
page 20). Refer to
, or the
,
or the number buttons
, and then press
For the locations of remote control
buttons, refer to page 46.
10
Press .
11
Press or
playback volume.
12
Press .
• The settings appear in the display window.
13
When the main unit is turned on,
press to turn off the main
unit.
• The playback timer is available only when
the main unit is turned off.
NOTE
• During operation, you can return to the previous
step by pressing
timer settings by pressing
not stored.
• When the playback timer starts, the volume
gradually increases to the selected level.
Canceling the playback timer
function
In step 2 on page 48, select the timer number you
want to cancel, and then press
Even when you cancel the playback timer, the set-
ting remains stored.
Activating the playback timer again
In step 2 on page 48, select the timer number you
want to activate, and then press
until all of the setting procedure finishes. Then turn
off the main unit.
NOTE
• When you want to activate two or three playback
timers, leave a blank time of 2 or more minutes
between the ending time of the first playback timer
and the starting time of the second playback timer.
If the blank time is less than 2 minutes, the second
playback timer does not work.
• When the power plug is disconnected or the
power is cut, the playback timer settings may be
lost. If the settings are lost, set the clock and
playback timer again.
• When you operate the playback timer with a DVD
VIDEO, DVD AUDIO or VCD, sound and video
may not be played back automatically. A DVD
VIDEO, DVD AUDIO or VCD may contain a disc
menu that appears first when played back.
Sound or video will not come out before you
select the desired item to be played back on the
disc menu.
Introduction
to adjust the
. You can quit the playback
. The settings are
.
repeatedly