Listening To A Digital Audio Player Readily (Qp Link); Listening To A Digital Audio Player; Adjusting The Sound Input Level - JVC UX-QX3WA Service Manual

Listening to a Digital Audio Player

Connect a Digital Audio Player to the LINE IN jack
in advance ( page 7).
1
Press .
2
Start playing the Digital Audio
Player.
• For details, refer to the instruction manual
for the Digital Audio Player.
3
Adjust the volume of the System
and the Digital Audio Player.
Bubbles appear when the System
detects the sound signal.
Listening to a Digital Audio
Player readily (QP Link)
QP Link (Quick Portable Link) automatically
switches the source to LINE as the Digital Audio
Player connected to the LINE IN jack (
starts playback.
Press .
• Each time you press
changes as follows:
: Activates the QP Link (initial
setting).
: Deactivates the QP Link.
• When the QP Link is activated, the QPLink
indicator lights on the display window.
18
page 7)
, the QP Link setting
QPLink indicator
■ How does the QP Link work?
While the QP Link is activated, starting playback
performs the following:
–
While listening to another source...
Changes the source to LINE automatically.
–
While the System is turned off...
Turns on the System and selects LINE as the
source automatically.
NOTE
• When the sound signal from the Digital Audio
Player is too weak, QP Link may not function
correctly. In this case, turn up the volume of the
Digital Audio Player so that the System can detect
the sound signal properly.
• Changing from LINE to another source while QP
Link is working will deactivate QP Link temporarily.
In this case, unplugging the Digital Audio Player
from the LINE IN jack reactivates QP Link.
• If you press to turn the System off or if
the timer turns the System off while QP Link is
working, the System will deactivate QP Link
temporarily. In this case, the following reactivates
QP Link:
– When the sound signal from the LINE IN jack
stops or is too weak for about 30 seconds after
the System is turned off.
– When you turn on the System again.
• While QP Link is activated, QP Link may start
working when you just connect the Digital Audio
Player to the LINE IN jack or unplug it. This is not
a malfunction.
Adjusting the Sound Input
Level
You can adjust the sound input level from the
Digital Audio Player.
1
Press .
2
Hold down
appears.
• Each time you hold down
input level changes as follows:
: Select this when the sound is
: Select this when the sound is
: Select this when listening to a
until the input level
, the sound
too loud with "LEVEL 2"
selected. This setting is
recommended when
connecting an audio device
other than a Digital Audio
Player to the LINE IN jack.
too loud with "LEVEL 3"
selected.
Digital Audio Player (initial
setting).