SSANGYONG KYRON User Manual page 202

WARNING
• Connecting the jumper cable to the negative terminal of the discharged battery could
result in arcing and possibly a battery explosion. Serious personal injury or vehicle
damage can result.
• Make sure that the jumper leads are securely connected. Otherwise, an abrupt dis-
connection due to vibration during engine starting may cause an electrical short re-
sulting in severe damage to electric components.
• Make sure that the booster battery has the same voltage rate with the discharged
battery.
• While connecting the jumper cables, make sure that the negative (–) and positive (+)
cables never touch each other. Otherwise sparks might cause an explosion of the
battery.
• Battery fluid contains acid that can burn you. Do not allow battery fluid to contact
eyes, skin, or painted surfaces. If you accidentally get it in your eyes or on your skin,
flush the place with water and contact your doctor. If you swallow battery fluid,
drink a large quantity of water or milk and see your doctor as soon as possible.
• While being transported in an ambulance, gently wipe out the contacted area with a
water-wet cloth or sponge.
CAUTION
• When starting your vehicle with jumper cable, turn off the engine of the boost
vehicle and connect the jumper cables.
• Ensure that the jumper cables are clear of fan blades before starting the engine.
6. Try to start the discharged vehicle while accelerating the engine rpm in
the booster vehicle.
7. Attempt to start the engine with the discharged battery.
8. After starting the engine, carefully disconnect the jumper cables in the
reverse sequence of connection.
Page 3
IN CASE OF EMERGENCY
2006-10-03, ¿ÀÈÄ 2:35
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
12-3