Panasonic WV-ASC970 Operating Instructions Manual page 73

***{ Max Number = Number of alive monitoring at a time for Recorder (1 - 128) }
CamAliveMonitoringNum=256
RecAliveMonitoringNum=128
***{ This section allow user to change the frequency of monitoring. }
***{ This section is applied for Camera and Recorder. }
***{ Format: AliveMonitoringFrequency=<Frequency> }
***{ Frequency = Frequency of monitoring (10 – 3600 sec) }
AliveMonitoringFrequency=10
***{ This section allow user to change timeout, retry frequency and retry count }
***{ of alive monitoring for HD300 series.}
***{ Format: AliveMonitoringTimeout_HD300=<Timeout> }
***{ Format: AliveMonitoringRetryFrequency_HD300 =<Retry Frequency> }
***{ Format: AliveMonitoringRetryCount_HD300 =<Retry Count> }
***{ Timeout =Time-out of monitoring for HD300 series (1 – 60 sec) }
***{ Retry Frequency=Retry frequency of monitoring for HD300 series (1 – 60 sec) }
***{ Retry Count=Retry count of monitoring for HD300 series (1 – 10) }
AliveMonitoringTimeout_HD300=20
AliveMonitoringRetryFrequency_HD300=6
AliveMonitoringRetryCount_HD300=6
***{ This section allow user to change timeout, retry frequency and retry count }
***{ of alive monitoring for DVR ( except HD300 series).}
***{ Format: AliveMonitoringTimeout_DVR=<Timeout> }
***{ Format: AliveMonitoringRetryFrequency_DVR=<Retry Frequency> }
***{ Format: AliveMonitoringRetryCount_DVR=<Retry Count> }
***{ Timeout = Time-out of monitoring for DVR (1 – 60 sec) }
***{ Retry Frequency = Retry frequency of monitoring for DVR (1 – 60 sec) }
***{ Retry Count = Retry Count of monitoring for DVR (1 – 10) }
AliveMonitoringTimeout_DVR=12
AliveMonitoringRetryFrequency_DVR=3
AliveMonitoringRetryCount_DVR=3
***{ This section allow user to change timeout, retry frequency and retry count }
***{ of alive monitoring for Camera).}
***{ Format: AliveMonitoringTimeout_CAM=<Timeout> }
***{ Format: AliveMonitoringRetryFrequency_CAM=<Retry Frequency> }
***{ Format: AliveMonitoringRetryCount_CAM=<Retry Count> }
***{ Timeout =Time-out of monitoring for Camera (1 – 60 sec) }
***{ Retry Frequency=Retry frequency of monitoring for Camera (1 – 60 sec) }
***{ Retry Count=Retry count of monitoring for Camera (1 – 10) }
AliveMonitoringTimeout_CAM=60
AliveMonitoringRetryFrequency_CAM=3
AliveMonitoringRetryCount_CAM=3
***{ This section allow user to change timeout, retry frequency and retry count }
***{ of alive monitoring for Encoder).}
***{ Format: AliveMonitoringTimeout_ENC=<Timeout> }
***{ Format: AliveMonitoringRetryFrequency_ENC=<Retry Frequency> }
***{ Format: AliveMonitoringRetryCount_ENC=<Retry Count> }
***{ Timeout = Time-out of monitoring for Encoder (1 – 60 sec) }
***{ Retry Frequency = Retry frequency of monitoring for Encoder (1 – 60 sec) }
***{ Retry Count = Retry count of monitoring for Encoder (1 – 10) }
AliveMonitoringTimeout_ENC=60
AliveMonitoringRetryFrequency_ENC=3
73