Video Loss Status Table; System Status Table - Panasonic WV-ASC970 Operating Instructions Manual

■ Video Loss Status Table
The table shows the video loss detection statuses.
1. Select a desired monitor. (Refer to p. 39 Monitor
Selection.)
2. Display "VL Stat" menu. (Refer to Step 1 and 2 of
p. 53 To Recall Menu Functions.)
VL Stat:
On Off
3. Select a desired function by pressing one of the F1
to F3 buttons.
Available buttons and functions
F1: On
Opens the VIDEO LOSS STATUS table.
F2: Off
Closes the VIDEO LOSS STATUS table.
F3: Blk
Changes the monitor background between camera
images and black picture.
VIDEO LOSS STATUS
CAM PORT NODE
6400 999 SX
6400 999 SX
6400 999 SX
6400 999 SX
CAM: Logical camera number
PORT#: Video input port number
NODE: Video switch node type
STATUS:
ABV/IN: Video level is above normal and in
sync.
BLW/IN: Video level is below normal and in
sync.
ABV/OUT: Video level is above normal and out
of sync.
BLW/OUT: Video level is below normal and out
of sync.
LOCATION: Logical cage number that the port
belongs to.
4. To display the next page, press the + button.
To display the previous page, press the – button.
009
Blk
PG
STATUS LOCATION
ABV/IN 1234567890
ABV/OUT 1234567890
BLW/IN 1234567890
BLW/OUT 1234567890
Note:
• To display the first page of table, press the + but-
ton while holding down the SHIFT button.
• To display the last page of table, press the – button
while holding down the SHIFT button.
5. To exit the VIDEO LOSS table, perform either of
the following.
• Select a camera. (Refer to p. 39 Camera
Selection.)
• Press F2, then press the MON(ESC) button.
• Press F2, then press the EXIT button.
Note:
• This feature is available in only WJ-SX650 or
WJ-SX850 because of OSD limitation.
■ System Status Table
The table shows the system status in real time.
1. Select a desired monitor. (Refer to p. 39 Monitor
Selection.)
2. Display "SysStat" menu. (Refer to Step 1 and 2 of
p. 53 To Recall Menu Functions.)
SysStat:
On Off
3. Select a desired function by pressing one of the F1
to F3 buttons.
Available buttons and functions
F1: On
Opens the SYSTEM STATUS table.
F2: Off
Closes the SYSTEM STATUS table.
F3: Blk
Changes the monitor background between camera
images and black picture.
SYSTEM STATUS
MON -A- CAM/DVR/SEQ
1 1 C6400001
999 999 R6400001 S128 12345 1234
999 999 T640010001P S128 12345
999 999 G640010001P S128 12345
010
Blk
PG
DEV USER PRI
K1 1 1
999
999
57