Recorder Control; Recorder Selection; Recorder Auto Selection; Recorder Manual Selection - Panasonic WV-ASC970 Operating Instructions Manual

Recorder Control

■ Recorder Selection
You can select a recorder by performing either of the
following.
• Recorder auto selection
• Recorder manual selection
Note:
• When selecting HD616/716 series and an error
window shows up, press the MENU button, then
press On button and then press Off button in order
to close the window.
● Recorder Auto Selection
1. Select a camera whose picture you wish to play
back. (Refer to p. 39 Camera Selection.)
2. Press the PLAY/PAUSE button.
The recorder connected to selected camera will
automatically selected, and playback will start.
3. Control the recorder.
Note:
• When you press the STOP button, the monitor dis-
play is changed to the live images.
4. To resume normal camera selection, select a cam-
era while live images are being displayed on the
monitor.
MON
0123 Unit:01
● Recorder Manual Selection
1. Enter a desired recorder number by pressing the
numeric buttons.
2. Press the RECORDER/UNIT button.
MON
0123 Unit:01
3. Control the recorder.
4. To resume normal camera selection, select a cam-
era while live images are being displayed on the
monitor.
52
DVR
>00512
DVR
>00512
Note:
• WV-ASC970 does not support the manual selec-
tion feature for network disk recorder.
■ Time & Date Search Playback
You can search playback images by entering a desired
recording date and time.
Note:
• To cancel the entry, press the MON (ESC) or EXIT
button. The LCD display will return to the normal
status.
1. Press the SEARCH/T & D SEARCH button while
holding down the SHIFT button. The time-and-
date entry form will appear on the LCD.
Mmm/DD/YYYY HH:MM
Mar/17/2004 12:00 AM
2. Move the cursor to a position to be edited by per-
forming either of the following.
• Move the 3D joystick controller to the right or left.
• Rotate the shuttle ring clockwise or counterclock-
wise.
Mmm/DD/YYYY HH:MM
Mar/16/2004 01:32 PM
3. Enter the desired date and time by performing
either of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
4. Press the PLAY/PAUSE button. The image on the
specified date and time will be played back on the
active monitor.
After the image has been played back, the LCD
will return to the default status.