Running Sequence; Tour Sequence; Group Sequence - Panasonic WV-ASC970 Operating Instructions Manual

Running Sequence

■ Tour Sequence
The following functions are available if a Tour Sequence
has been previously configured through the admin con-
sole. Any Tour Sequence can be assigned to any moni-
tors.
1. Select the desired monitor. (Refer to p. 39 Monitor
Selection.)
2. To select the desired Tour Sequence number, press
the numeric buttons.
MON 1
0123 Unit:01
Note:
• When you have selected a wrong number, press
the CLEAR button to clear the numeric input.
3. Press the TOUR SEQ/GROUP SEQ button. The
Tour Sequence will run in forward direction on the
active monitor, and the Tour Sequence number
with "R" (Running) sign is displayed on the active
monitor.
MON A001T0001R CAM
0123 Unit:01
Note:
• The messages on the LCD indicate the following.
Annn: Area No.
Tnnnn: Tour Sequence No.
R: Running
4. To pause the sequence, press the SEQ PAUSE/
SEQ STOP button.
The "P" (Pausing) sign will be displayed beside the
Tour Sequence number area on the active monitor,
and "P" will appear beside the Tour Sequence
number.
MON A001T0001P CAM
0123 Unit:01
• To switch to the next sequence step, press the +
• To switch to the previous sequence step, press the
• To resume the sequence, press the TOUR SEQ/
CAM
00512
• You can also return to spot monitoring by selecting
• In case of global camera numbering method, the
00512
■ Group Sequence
The following function is available only if a Group
Sequence has been previously established through
the admin console. A Group Sequence determines the
assignment of monitors and cameras.
• When you have selected a wrong number, press
00512
Note:
button during sequence pause.
– button during sequence pause.
GROUP SEQ again.
5. To return to spot monitoring, press the SEQ
PAUSE/SEQ STOP button while holding down the
SHIFT button.
Note:
a camera.
LCD shows a tour sequence number as shown
below.
In this method, the number includes just tour
sequence number and not includes the area num-
ber.
MON T1234R
0123 Unit:01 1234567
1. Press the numeric buttons to select a desired
Group Sequence number.
MON 1
0123 Unit:01
Note:
the CLEAR button to clear the numeric input.
CAM
CAM
00512
45