Table of Contents
Advertisement
How to program the Airlab
REMOTE ON POSSIBLE IN MIC MODE
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This allows you to operate the ON switch on one or more
selected modules by corresponding remote, when the Mic
input is selected. Not available for Telco Module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. If you have already
programmed several modules, the moment you enter this menu again the LED's located near the SELECT
switch will light up on the modules that are capable of activating the ON by a remote switch when the MIC
input is selected.
REMOTE ON POSSIBLE IN LINE A MODE
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This allows you to operate the ON switch on one or more
selected modules by the corresponding remote, when the
Line A input is selected. Always off for Telco module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED's located near the SELECT switch will light up on the modules that are capable of
activating the ON by a remote switch.
REMOTE ON POSSIBLE IN LINE B MODE
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This allows you to operate the ON switch on one or more
selected modules by the corresponding remote, when the
Line B input is selected. Always off for Telco module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED's located near the SELECT switch will light up on the modules that are capable of
activating the ON by a remote switch in line B input mode.
SWITCH START
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
With this option active the module is always ON and
operation On-switch will only trigger the start-remote. Not
available for Telco Module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED's located near the SELECT switch will light up on the modules that are capable of
Switch Start.
Airlab from D&R Phone +31 294 418014, email:
MIC Rem. On?
Toggle by SELECT
LineA Rem. On?
Toggle by SELECT
LineB Rem. On?
Toggle by SELECT
Switch Start?
Toggle by SELECT
info@d-r.nl
Page 57
Hide quick links:
Advertisement
Table of Contents
