Back Panel Connectors - D&R Airlab User Manual

Back Panel Connectors

10 BACK PANEL CONNECTORS
The connector back panel of the
master section has
in/outputs to interface with external
equipment and a PC.
SPARE 1 - 4
We have integrated 4 openings,
which fit spare XLR connectors for
"do it yourself" purposes. An
activity extremely loved by in-
house technicians.
Below these spare openings are
the power on/off switch, a power
inlet and the ground connector of
the console to be used as central
star ground point for the studio.
The other two sections
described on the next page.
==================================================
The Airlab can be set to 115 volt only by qualified technicians
==================================================
Airlab from D&R Phone +31 294 418014, email:
all the
are
Figure 3: The connections on the Master Section
The mains input is set for 230 volt 50/60 Hz.
info@d-r.nl Page 34