How To Confirm The Dvs - Pioneer DJM-900NXS Service Manual

5

8.3 HOW TO CONFIRM THE DVS

Necessary Items
• PC with the USB driver and TRAKTOR (demo version or TRAKTOR DDJ-T1 EDITION possible) installed
Can download the Traktor demo version from the following URL.
http://www.native-instruments.com/#/en/products/dj/traktor-pro-2/?page=1975
• Media (CD, etc.) for checking operations, CDJ player
Check Procedures
1. Connect this unit and a PC, using the USB cable.
2. Connect the audio output of CDJ Player to the CD/LINE of CH1 of this unit.
3. Set the DIGITAL, CD/LINE, PHONO, LINE, and USB */* selectors to USB1/2.
4. For details on settings to be made on the PC, see "Settings for the Driver" and "Settings on TRAKTOR" below.
5. Play back the CDJ Player, and check the following items:
• The level meters of Input Routing and Master Out on the TRAKTOR move in sync with audio output signals (see the
photos below).
• The USB audio input indicator of CH1 turn on.
• The Master Out is output normally.
*Repeat the above steps for channels 2 to 4, to check the DVS paths.
[TRAKTOR Input Routing level meter]
[TRAKTOR Master Out level meter]
Note:
The Master Out signal will not be output if the MAIN volume control
(indicated with a red frame) is set to the minimum volume position.
If the MAIN volume indicators are not displayed on the screen, set the
TRAKTOR screen to Full screen.
[Connection Diagram (When the CDJ Player is Connected to CH1)]
Computers
USB cable
5
6
DJM-900nexus DJM-900nexus
Power amplifier
DJM-900NXS
6
7
[USB audio input indicator]
CDJ player
7
8
A
B
C
D
E
F
81
8