Pioneer DJM-900NXS Service Manual page 79

5
[5] Executing Updating
* Close all of applications before updating.
* If you were setting firewall by security software, it would not be able to transfer the data to mixer.
Please read the operation manual of the security softwareor canncelt the firewall.
<STEP 1>
Double click "DJM900nexus_vxxx.exe".
Start update tool.
<STEP 2>
Select language.
<STEP 3>
Start updating by pressing "Start".
* NEVER remove power/LAN cable on updating.
* If the waiting picture remains more than 30 seconds, the
network connection might not work. Press Cannel button
and update again after connecting it.
[6] Confirmation of the Firmware Version
5
6
<STEP 4>
Confirm the updating completed.
Updating completed when "SUCCESS" message shows.
<STEP 5>
Restart this unit.
* Please adjust network setting as original
if you adjusted it in 3-1.
U P D AT E
Ve r
X . X X
<STEP1>
Press [CUE (BEAT EFFECT)] and [ON/OFF (BEAT
EFFECT)] with power button.
Move to update mode.
<STEP2>
Check it is the latest version.
Update was completed if it shows "x.xx".
DJM-900NXS
6
7
7
8
A
B
C
D
E
F
79
8