System Tour
Refer to the figures below to identify the components of the system.
Connectors on the Bottom
Power Switch
The power button allows powering ON and OFF the system.
COM
D-Sub 9 pin connector for RS-232 connection
Ethernet
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for
connection to a local network.
S/PDIF
S/PDIF output for carrying digital audio signals out to the device.
Phone Jack
Audio Out
The stereo headphone jack is used to connect the system's audio out signal to
amplified speakers or headphones.
MIC-IN
The microphone jack is designed to connect the microphone used for video
conferencing, voice narrations, or simple audio recordings.
KPC-1200 User's Manual
Figure 1 Bottom View
15
Chapter 1