Table of Contents
Advertisement
3.6
Switching between two calls ( Broker call)
You are in communication with a first correspondent and the secont is
on hold. You are in conversation with a first correspondent and the
second is on hold. You want to switch from one correspondent to the other.
Enter the feature code: Switching between calls ( Broker call)
You are in conversation with the second correspondent and
the first one is on hold. You are in conversation with the second
correspondent and the first is on hold
Enter the feature code: Switching between calls ( Broker call)
You are in conversation with the first correspondent and the
second is on hold. You are back in conversation with the first
correspondent and the second is on hold.
3.7
Transferring a call
After dialling the destination number, you can transfer the call directly without
waiting for your correspondent's reply by validating the 'Transfer' option.You can
initiate the transfer by using the icon or the 'Transfer' text.The transfer between
two external correspondents and the transfer by pressing the hang-up key depend
on the system configuration.
You are in communication with a first correspondent
The two correspondents are connected
CLR
Setting up a conference
3.8
You are in communication with a first correspondent. A
second correspondent is on hold.
Enter the feature code: Three-way conference
You are in conference mode
Use the same procedure to cancel the conference and recover the first
call.
• Calling a second person during a conversation
• Hang up the ongoing call
16
Advertisement
Table of Contents
