Installing the Expansion Unit (KX-TD290)*
1. Loosen the two screws on the cover plate.
Insert your fingers into the slits to remove
the cover plate.
Slit
Note Any of the cover plates can be
removed, as needed.
2. Connect the cabinet cord to the
connector in the main unit firmly.
3. Hook the cabinet onto the main unit
and slide the cabinet to the left until it
is secured.
*: Available for the KX-TD1232 Master system only.
4. Loosen the outside screw and slide the
cover to the right.
Slit
5. Secure the inside screw (included) to fix
the cabinet to the main unit.
Note Be sure to attach the inside screw
6. Prepare the required plugs. Two 4-pin
plugs are included with the KX-TD290.
Outside screw
securely, or the unit will not work
properly.
RB
TB
or
RA
TA
Inside screw
15