Riso 390 User Manual page 45

4
Start the master-making process.
When placing originals on the Glass Platen
Single-original printing
Press the
After the scan an interval time alarm
sounds. Before the alarm stops, press the
key again.
Important!:
• If you do not press the
interval time, the half of the print will be
blank.
Note:
• If you select no interval time using the
Custom Setting mode, you can complete
2-Up printing by pressing the
once.
p.64
Two-original printing
Press the
After the scan an interval time alarm
sounds. Before the alarm stops, place the
second original, make various settings (if
necessary), and then press the
again.
Important!:
• If you do not press the
interval time, the half of the print will be
blank.
When placing originals in the ADF unit (option)
Single-original printing
Press the
Place the second original within the interval
time. Scan of the second original is auto-
matically started.
Note:
• If you don't select an interval time using
the Custom Setting mode, you cannot
perform single-original printing with the
ADF unit.
Two-original printing
Place two piled originals in the tray. Press
the key to sequentially execute 2-Up
printing using the two originals. If you want
to make different settings for each original,
place only the first original, and then press
the key. Within the interval time, change
the settings, and then place the second
original. Scan of the second original is auto-
matically started.
key to start the first scan.
key within the
key only
key to start the first scan.
key
key within the
key to start the first scan.
Setting up for Scanning Originals
5
Enter the number of copies to be
printed, using the Print Quantity keys.
The specified number is shown on the Print Quan-
tity Display.
6
Press the key.
2-Up printed copies are output.
Note:
• If there exists an original in the ADF unit when
"Auto-Process" is "ON" for two-original printing,
2-Up printing is sequentially executed.
Printing Originals Side-by-Side [2-Up Printing] 43