Riso 390 User Manual page 105

Location Error No.
No.
A-01
A-34
A-17
A-05
J-08
Cause
A master has not been correctly set. Open the Master Making Unit Cover, remove the
A master has not been correctly cut.
A master jam has occurred in the
master disposal section.
A paper jam has occurred on the
Paper Feed Tray section.
Action
master roll, and set the master correctly. If the
master is loose, turn the right flange inward to
correct it, and close the Master Making Unit
Cover.
p.88
1)
Remove the master roll and close the
Master Making Unit Cover.
2)
Set the master again.
p.88
1)
Remove the Master Disposal Box.
2)
Stand at the side of the Paper Feed Tray
and push down the Master Disposal Roller
Release Lever at the inside right.
3)
Remove the master jammed on the roller
section.
4)
Push the Master Disposal Roller Lock Lever
inward.
5)
Set the Master Disposal Box.
p.91
1)
Remove the jammed paper.
2)
Set paper again.
3)
If the error indications do not disappear,
press the key.
Check & Error Display
Troubleshooting
103