Using The Dvd Multi Playback Mode; Activating The Dvd Multi Playback Mode - JVC RX-7030VBK Instructions Manual

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD
player.
Connection diagram
RX-8030VBK
RX-7030VBK/RX-7032VSL
AUDIO
SUBWOOFER CENTER RIGHT LEFT
DVD
IN
SURR
(REAR)
R
R
L
DVD player
DVD
A
B
C
D
E
Å To component video output
ı To subwoofer output
Ç To center channel audio output
Î To S-video output
‰ To composite video output
Ï To left/right front channel audio output
Ì To left/right surround channel audio output
Note:
When connecting a DVD player to the component video input
jacks, make the component video input setting correctly. See
page 30 for details.
40
COMPONENT VIDEO
DVD
IN
VIDEO
VIDEO S-VIDEO
DVD
IN
FRONT
L
F G

Activating the DVD MULTI Playback Mode

1. Press DVD MULTI so that "DVD MULTI"
appears on the display.
The MULTI indicator also lights up.
ANALOG MULTI
L C R LINEAR PCM
SUBWFR
LS RS
Note:
When you select "DVD MULTI" as the source to play, the Surround
and DSP modes are canceled, and the SURROUND and DSP
buttons do not work.
2. Select the analog discrete output mode on the
DVD player, and start playing a DVD.
• Refer also to the manual supplied with the DVD player.
You can adjust Digital Equalization patterns and speaker output
levels. See "Adjusting the Equalization Patterns" on page 32 for
details.
Notes:
• Midnight Mode is not available for DVD MULTI playback mode (see
page 20).
• When using a headphones, you can listen to the front channels (left
and right) only.
SPEAKERS 1
VOLUME