Basic Operations; Daily Operational Procedure; Turning On The Power; Selecting The Source To Play - JVC RX-7030VBK Instructions Manual

Basic Operations

The following operations are commonly used when you play any sound sources.
Operations hereafter will be explained using the buttons on the front panel.
You can also use the buttons on the remote control for the same functions if they have the same and similar names/marks.

Daily Operational Procedure

1
4
2
1 Turn on the power.
• See "Turning On the Power" below.
2 Select the source.
• See "Selecting the Source to Play" to the right.
3 Adjust the volume.
• See "Adjusting the Volume" on page 18.
4 Select the surround or DSP modes.
• See "Activating the Surround Modes" (page 37) and
"Activating the DSP Modes" (page 39).

Turning On the Power

Press STANDBY/ON (or AUDIO
control).
The STANDBY lamp goes off. The name of the current source and
Surround/DSP mode appear on the display.
Current source name and Surround/DSP mode appear
ANALOG
L R LINEAR PCM
To turn off the power (into standby mode),
press STANDBY/ON (or AUDIO
again.
The STANDBY lamp lights up.
Note:
A small amount of power is consumed in standby mode. To turn off
the power completely, unplug the AC power cord.
3
on the remote
SPEAKERS 1
VOLUME
Current volume level appears.
on the remote control)

Selecting the Source to Play

Press one of the source selection buttons.
• The selected source name and the previously selected Surround/
DSP mode also appear on the display.
Selected source name and current
Surround/DSP mode appear.
DUAL ANALOG DIGITAL AUTO 96/24 MULTI
L C R
LINEAR PCM
SUBWFR LFE DIGITAL
LS S RS
SB
For RX-8030VBK
TV SOUND
DVD MULTI DVD VCR 1 VCR 2 VIDEO
/DBS
On the unit
• The lamp on the selected source lights up (ex. when DVD is
selected as the source).
DVD MULTI DVD
VCR1 VCR2
TV/DBS VIDEO
On the remote
For RX-7030VBK
VCR TV SOUND/DBS
DVD MULTI DVD
On the unit
DVD MULTI DVD
TV/DBS VCR
On the remote
Notes:
• For RX-8030VBK: When connecting an MD recorder (to the TAPE/
MD jack) and a DBS tuner (to the TV SOUND/DBS jacks), change
the source names shown on the display. For details, see page 21.
• For RX-7030VBK: When connecting an CD recorder (to the TAPE/
CDR jacks) and a DBS tuner (to the TV SOUND/DBS jacks),
change the source names shown on the display. For details, see
page 21.
TUNED STEREO AUTO MUTING ONE TOUCH OPERATION SLEEP
NEO:6 VIRTUAL SB MIDNIGHT MODE
PRO LOGIC DIGITAL EQ
DSP 3D - PHONIC HEADPHONE SPEAKERS 1 2 BASS BOOST
INPUT ATT
VOLUME
PHONO CD CDR TAPE/MD FM AM
CD FM/AM
CDR TAPE/MD
PHONO
CD TAPE/CDR FM AM
CD
FM/AM
TAPE/CDR
17