Setting The Component Video Input; Memorizing The Volume Level For Each Source - JVC RX-7030VBK Instructions Manual

For RX-7030VBK/RX-7032VSL:
As you set the components connected to the digital coaxial
terminal (DIGITAL IN 1), the optical terminals (DIGITAL IN 2
– 4) will be automatically fixed to connect the components listed
below.
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "DVD"
2: CD 3: TV (or DBS*)
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "CD"
2: DVD 3: TV (or DBS*)
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "TV" or
"DBS"*
2: DVD 3: CD
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "CDR"
2: DVD 3: CD
* If you have changed the source name from "TV" to "DBS,"
"DBS" appears (see page 21).

Setting the Component Video Input

When you use the component video inputs for connecting the DVD
player and/or DBS tuner, register the type of input jacks.
If you have not selected appropriate video input jacks, the AV
COMPU LINK remote control system cannot operate properly. (See
page 42.)
7 For the DVD player—VIDEO IN DVD
Select one of the following:
COMPNT: Select when connecting the DVD player to the
component video input jacks.
S/C: Select when connecting the DVD player to the
composite video or S-video input jacks.
7 For the DBS tuner—VIDEO IN DBS
Select one of the following:
COMPNT: Select when connecting the DBS tuner to the
component video input jacks.
S/C: Select when connecting the DBS tuner to the
composite video or S-video input jacks.
30
4: CDR
4: CDR
4: CDR
4: TV (or DBS*)

Memorizing the Volume Level for Each Source

This unit memorizes some settings separately for each source.
In addition, you can store the volume level for each source with the
other memorized settings—One Touch Operation.
7 One Touch Operation—ONE TOUCH OPE
Select one of the following:
ON: Select to store the volume level separately for each
source. (The ONE TOUCH OPERATION indicator lights
up on the display.)
This receiver memorizes the volume level—
• when you change the source, or
• when you change the source name.
OFF: Select this not to store the volume level.
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume
level for the currently selected source is recalled when the
source is selected.
To cancel the One Touch Operation
Set One Touch Operation to "OFF" so that the ONE TOUCH
OPERATION indicator goes off.