Fujitsu Siemens Computers 461V FA Operating Manual page 21

Monitor settings with the buttons of the control panel
With the buttons of the control panel, you can make the following settings directly: auto-adjustment
of the monitor, adjusting the brightness and adjusting the contrast.
Other settings are carried out via an integrated OSD menu (On-Screen Display). For
i
additional information, refer to the section
1 = AUTO button
2 = Arrow buttons and OK button
Performing auto-adjustment of the monitor
Ê
Press the AUTO button.
The picture quality (PHASE, CLOCK) and picture position will be optimally adjusted for your system.
Adjusting the brightness and contrast
Contrast and brightness are adjusted directly with the arrow buttons.
You will increase the life of your screen if you adjust the brightness to medium.
i
Ê
Press the or
A window is displayed with a setting range (in this case BRIGHTNESS).
B R I G H T N E S S
50
A26361-K708-Z100-2-5E19
OK
AUTO
1 2
button (brightness) or
"Monitor settings using the OSD
3 = Power indicator
4 = ON/OFF switch
or (contrast).
Ê
Press the or
brightness.
Ê
Press the or
contrast.
The setting window disappears after
approximately 3 seconds if no further setting is
made. All changes are stored automatically.
Color monitor 461V FA
menu".
3 4
button to adjust the
button to adjust the
English - 13