Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu Siemens Computers SCALEOVIEW H17-1
Summary of Contents for Fujitsu Siemens Computers SCALEOVIEW H17-1
- Page 1 Monitor English Operating Manual SCALEOVIEW H17-1/H19-1/ H19-1W...
- Page 2 Are there… ... any technical problems or other questions which you would like to be clarified? Please contact our help desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com...
- Page 4 This manual was produced by Xerox Global Services Published by Fujitsu Siemens Computers GmbH AG 08/06 Edition 2 Order no.: A26361-K1086-Z120-1-7619...
- Page 5 SCALEOVIEW H17-1/ H19-1/H19-1W Operating Manual August 2006 edition...
- Page 6 VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH 2006 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages.
-
Page 7: Table Of Contents
Contents Introduction............................1 Important notes............................. 2 Safety notes..........................2 Power cable..........................3 Transport ............................4 Cleaning ............................4 CE marking........................... 4 FCC Class B Compliance Statement ................... 4 Declaration of Conformity ......................5 Energy Star Guidelines......................... 5 Disposal and recycling ......................... 6 Checking the contents of the consignment................... - Page 8 Contents A26361-K1086-Z120-1-7619, edition 2...
-
Page 9: Introduction
A graphics card (screen controller) with VGA interface or a digital graphics card with DVI interface is required to control the SCALEOVIEW H17-1/H19-1/H19-1W LCD monitor. The monitor processes the data supplied to it by the screen controller. The screen controller/the associated driver software is responsible for setting the modes (resolution and refresh rate). -
Page 10: Important Notes
SCALEOVIEW H17-1/H19-1/H19-1W Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. -
Page 11: Power Cable
SCALEOVIEW H17-1/H19-1/H19-1W ● The monitor is equipped with a power cable that complies with safety standards. ● Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the "Connecting the monitor" chapter. -
Page 12: Transport
SCALEOVIEW H17-1/H19-1/H19-1W Transport ● Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts. ● Never drop the LCD monitor (danger of glass breakage). Cleaning ● Always pull out the power plug before you clean the monitor. -
Page 13: Declaration Of Conformity
Fax No.: (408) 746-8299 We, Fujitsu Siemens Computers Inc., hereby declare that the equipment bearing the trade name and model number specified above was tested confirming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements. -
Page 14: Disposal And Recycling
SCALEOVIEW H17-1/H19-1/H19-1W Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a condition that is the result of normal use. -
Page 15: Installing An Ergonomic Video Workstation
SCALEOVIEW H17-1/H19-1/H19-1W Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. Avoid glare from electric Windows approx. 90° and more lighting. -
Page 16: Mounting And Removing The Monitor Base
SCALEOVIEW H17-1/H19-1/H19-1W Mounting and removing the monitor base Mounting monitor base When delivered the lower section of the monitor base is removed. ► Push the lower section of the monitor base (2) in the upper section (1). ► Fasten the screw (3). -
Page 17: Connecting The Monitor
SCALEOVIEW H17-1/H19-1/H19-1W ► Remove the cover (3) and disconnect all cables. ► Remove the two screws under the covers (1 and 2). You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 100 mm hole spacing. -
Page 18: Connecting Cables To The Computer
SCALEOVIEW H17-1/H19-1/H19-1W The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI connectors for connection to the monitor and to the computer. ► Select the suitable data cable for your computer. Digital graphics card with DVI interface:... -
Page 19: Operation Of The Monitor
SCALEOVIEW H17-1/H19-1/H19-1W ► Plug the power connector of the computer into a properly grounded mains outlet. When you start working with your monitor for the first time you should install the appropriate graphics drivers for your application software. Details of how to do this are provided in the documentation on your screen controller/the associated driver software. -
Page 20: Notes On Power Management
SCALEOVIEW H17-1/H19-1/H19-1W When you switch the computer system on, you must proceed in the following order: ► First switch on the LCD monitor with the ON/OFF switch (2). ► Then switch on the computer. If your computer has a power management function (energy-saving mode), you should read the "Notes on power management"... -
Page 21: Changing The Monitor Settings
SCALEOVIEW H17-1/H19-1/H19-1W Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Basic monitor settings with the CD supplied... -
Page 22: Monitor Settings Using The Osd Menu
SCALEOVIEW H17-1/H19-1/H19-1W The following settings are offered: Office suitable and optimised for word processing Photo suitable and optimised for photo editing Video suitable and optimised for videos Games suitable and optimised for games Max Speed suitable only for application with optimal response time. Not suitable for office applications. - Page 23 SCALEOVIEW H17-1/H19-1/H19-1W The corresponding setting window (here: Image Adjust ) is displayed (on the right-hand side). The first function ( H-Position ) is highlighted. ► If necessary, press the /INPUT button to mark another function. ► Press the SELECT/MENU button to select the highlighted function.
- Page 24 SCALEOVIEW H17-1/H19-1/H19-1W Adjusting size and position Calling the Image adjust setting window H-Position Adjusting the horizontal position With this function you move the picture to the left or to the right. Adjusting the vertical position V-Position With this function you move the picture up or down.
- Page 25 SCALEOVIEW H17-1/H19-1/H19-1W Setting display of the OSD menu Calling the OSD Setup setting window Language Setting language for the OSD menu With this function you select the language for the OSD menu. The following languages are offered: English (default setting)
-
Page 26: Troubleshooting
SCALEOVIEW H17-1/H19-1/H19-1W Displaying information Calling the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal and polarity of the synchronisation signal are displayed. Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. - Page 27 SCALEOVIEW H17-1/H19-1/H19-1W Having this problem? Check the following points: Picture position not correct The monitor recognises an undefined mode (see the "Technical data" chapter). ► Press the EXIT/AUTO button to perform the auto- adjustment of the screen. ► Set the picture position with the OSD menu (see the "Operation of the monitor"...
-
Page 28: Notes Regarding The Din En Iso 13406-2 Standard
SCALEOVIEW H17-1/H19-1/H19-1W Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the stringent international standard ISO 13406-2 (Class II). -
Page 29: Technical Data
SCALEOVIEW H17-1/H19-1/H19-1W Technical data Dimensions and weight (LCD monitor) Visible diagonals: 43 cm (H17-1); 48 cm (H19-1) Dot pitch: 0.264 mm (H17-1); 0.294 mm (H19-1); 0.285 mm (H19-1W) Screen size: 337.9 mm x 270.3 mm (H17-1) 376.2 mm x 301 mm (H19-1) 410.4 mm x 256.5 mm (H19-1W) -
Page 30: Vesa-Ddc-Compatible Vga Interface
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings. If the monitor SCALEOVIEW H17-1/H19-1/H19-1W is not yet displayed in the list of monitors, you can select the following monitor instead:... -
Page 31: Power Supply Plug
SCALEOVIEW H17-1/H19-1/H19-1W SCALEOVIEW H19-1W Horizontal frequency Refresh rate Screen resolution 31.5 kHz 70 Hz 720 x 400 31.5 kHz 60 Hz 640 x 480 37.5 kHz 75 Hz 640 x 480 37.9 kHz 60 Hz 800 x 600 46.9 kHz... -
Page 32: Monitor Port Dvi-D/Dvi-I
SCALEOVIEW H17-1/H19-1/H19-1W Monitor port DVI-D/DVI-I C1 C2 Meaning Meaning Meaning TMDS Data2- TMDS Data 1/3 Shield not connected TMDS Data2+ not connected TMDS Clock Shield TMDS Data 2/4 Shield not connected TMDS Clock+ not connected +5V Power TMDS Clock- not connected... -
Page 33: Pin Assignment D-Sub
SCALEOVIEW H17-1/H19-1/H19-1W Pin assignment D-SUB Meaning Meaning Video input red +5 V (DDC) Video input green Sync. earth Video input blue Earth Earth DDC-Data Earth H. sync Red video earth V. sync Green video earth DDC Clock Blue video earth...