Fujitsu Siemens Computers 461V FA Operating Manual page 23

The OSD menu for analogue monitor operation is described in the following. During digital
i
operation some functions are not available, as they are not required due to the digital
transmission technology used.
Setting language for the OSD menu
Setting language for the OSD menu (LANGUAGE)
?
You can choose from English (default setting), German, French, Spanish, Italian,
and Japanese.
Adjusting picture position
Calling the ADJUST POSITION setting window
Adjusting size
Calling the ADJUST SIZE setting window
Switching the full-screen mode on (FULL SCREEN)
The display area is stretched to the full picture size (1,280 pixels, side ratio 5:4).
This will cause other resolutions to appear distorted.
Switching the full-screen mode off (NATIVE MODE)
Setting the individual picture size (USER SETTINGS)
Adjusting the brightness and contrast
Calling the BRIGHTNESS & CONTRAST setting window
If the contrast is set too high, bright surfaces can no longer be distinguished from very
i
bright surfaces. If the contrast is set too low, the maximum brightness will not be
achieved.
A26361-K708-Z100-2-5E19
Horizontal picture position (HORIZONTAL): Shifting the picture to the left
or to the right
Vertical picture position (VERTICAL): Shifting the picture down or up
Setting the brightness of the display (BRIGHTNESS)
Setting the contrast of the display (CONTRAST)
Color monitor 461V FA
English - 15