Installation - LG AMNH096BTG0 Manuals

Piping length and elevation
No.
(1) Total main piping length
(2) Total branch piping length
(3) Max. each branch piping length
(4) Total system piping length
(5) Maxium Level in - out
(6) Maxium Level in - in

Installation

• This unit may be installed suspended from the ceiling or mounted on the wall.
• This unit may only be installed horizontally , as shown in the diagram below. (Side B is facing up) However, it may
be freely installed in any direction, forward or backward, and to the sides.
• Be sure to secure a 600mm square opening for service and inspection as shown in the diagram below, for both
ceiling - suspended installation and wall-mounted installation.
• BD unit does not require drain treatment as it uses internal insulation.
• Service direction is the side B and C
• The piping for the indoor unit may be led around in direction A
• The inclination of side B must be within ±5 degree forward or backward or to the sides.
A
Suspension bolt pitch.
(36) 50 50 50
(56) 50 50 50
Branch Pipe
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Length
A+B
L1+L2+L3+L4+L5+L6+(L7)+(L8)
L1, L2, L3, L4, L5, L6, L7,L8
(Total main) + (Tatal branch)
h1
h2
245
Main Pipe
432
72 300 60
Cover Control
4 room 6 room 7 room 8 room
15
50
15
65
15
7.5
Ø19.05
Ø9.52
(LEV service)
B
30 50
C
(Controller service)
- 89 -
Installation
50 50 50
50 60 60
15 15 15
100 110 120
30 30 30
10 10 10
(Servicing space)
Min 400
Min 400
(Side view)
Inspection opening
600
(Bottom view)
LGE Internal Use Only
(m)