LG AMNH096BTG0 Manuals page 135

3. CVT Type - VB chassis
Warning : Disconnect the unit from power
supply before making any checks.
Be sure the power switch is set to "OFF".
1. Remove the air filter.
• Pull the inlet grille slightly toward you.
• Pull out the air filter. (2 pieces)
2. Remove the girlle from chassis
• Remove the screws securing the side plate and
push to the bottom-side.
• Unhook the hanger from the hanger screw at the
left and the right side.
• Pick out the inlet grille.
3. Remove the lower air guide
• Remove a screw of both side fixing "barrier air-
guide".
• Remove the screws of both sides of the lower
air-guide.
• Remove the lower air-guide toward "arrow mark"
by turning upwards as shown in figure.
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Inlet Grille
Hanger
Barrier Air guide
Lower Air guide
- 135 -
Disassembly of the parts
3
4
Hanger
Screw
LGE Internal Use Only
1
2