LG AMNH096BTG0 Manuals page 73

CAUTION: If a power plug is not to be used, provide a circuit breaker between
power source and the unit as shown below.
The power cord connected to the outdoor unit
should be complied with the following specifica-
tions (Rubber insulation, type H05RN-F approved
by HAR or SAA).
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Main power source
Air
Circuit Breaker
Conditioner
Use a 30A circuit
breaker or time
delay fuse.
NORMAL CROSS-
SECTIONAL AREA
3.5mm
2
CAUTION
The connecting cable connected to the indoor
and outdoor unit should be complied with the fol-
lowing specifications (Rubber insulation, type
H07RN-F approved by HAR or SAA).
- 73 -
Installation
NORMAL CROSS-
SECTIONAL AREA
0.75mm
2
LGE Internal Use Only