LG AMNH096BTG0 Manuals page 64

Installation
3) Installation on the floor
Installation of Mount Bracket.
• Select and mark the position for Mount Brackets and
the piping hole.
• Drill the hole for the anchor nut on the wall.
• Drill the piping hole using a ø70 hole-core drill.
• Secure the Mount Brackets on the wall with four M4
screws.
Install the indoor unit onto the Mount Brackets.
• Engage the slot at the back of the unit with Mount
Bracket.
Drill the piping hole with 70mm dia, hole core drill.
•
• Piping hole should be slightly slant to the outdoor side.
After Installing, reassemble detached parts.
• Hang the 'Inlet Grille' and hook the 'Inlet Hanger' to the
Hanger Screw.
• Assemble the 'Side Plates(R,L)' with 2 screws on both
left and right side.
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
From the left wall
more than 760mm
Slot
Floor mount
bracket
Indoor
- 64 -
From the
right wall
more than 840mm
Wall
Outdoor
Slot
Wall
Floor mount
bracket
Install plate
Piping hole
LGE Internal Use Only