General Information - LG AMNH096BTG0 Manuals

General Information

I Error Indicator (Indoor)
• The function is to self-diagnosis air conditioner and express the troubles if there is any trouble.
• Error mark is displayed on display window of indoor units and wired-remote controller, and LED of outdoor unit
control board.
• If more than two troubles occur simultaneously, lower number of error code is first displayed.
• After error occurs, if error is released, error LED is also released simultaneously.
I Indoor Error
Error
code
01 Air sensor (open/short)
02 Inlet pipe sensor
Communication(Indoor ↔ Wired R/Control)
03
04 Drain pump/ Float switch
Communication(Indoor ↔ Outdoor)
05
06 Outlet pipe sensor
07 Different operation mode
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1 digit 10 digit
Contents
- 193 -
Case of error
Open / Short
Open / Short
Communication Poorly
Float switch Open
Communication Poorly
Open / Short
Different operation mode
Troubleshooting Guide
Indoor
Status
Off
Off
Off
Off
Off
Off
Off
LGE Internal Use Only