Optical Parts Disassemblies - Sanyo PLV-80 Service Manual

Optical Parts Disassemblies

Before taking this procedure, remove Cabinet Top and Main Board following to the "Mechanical Disassemblies".
Disassembly requires a 2.0mm or 2.5mm hex wrench and a slot screwdriver.
Projection Lens removal
1
Remove Cabinet Front-Top following to the chapter "Mechanical
Disassemblies".
2
A
Loosen 2 screws with 2.5mm hex wrench.
3
B
Unhook 2 hooks on the both side of the lens and remove the Projection
Lens ass'y off.
B
A
A
Polarized Glass-In and Optical filter removal
1
Remove each hex screw and pull the Polarized Glass-In ass'y upward.
2
Remove the stoppers and take the glasses off.
* The B-Plolarised Glass-In ass'y does not provide the Optical filter.
B
Fig.1
Fig.2-
1
-13-
Part No.
Polarized Grass
*
5 * *
Z 1
V 4
1 A Film side
Part No.
* Glasses should be placed as the
film sheet attached side comes to
LCD panels side.
Fig.1-
2
Optical Filter(WV)
*
5 * *
Z 1
V 4
1 A
Film side
Fig.2-
2