Table of Contents
Advertisement
■ Optical Parts Disassemblies
Before taking this procedure, remove Cabinet Top , Cabinet Front and Main Board following to the "Mechanical
Disassemblies".
Disassembly requires a 2.0mm hex wrench.
z
Projection Lens removal
1
Remove 4 screws (M3x8) and remove the Projection Lens.
x
Integrator Lens-In disassembly
1
A
Remove 2 screws
(M2.5x5) and pull the Integrator Lens-In ass'y upward.
2
B
Remove 2 screws
(M2x2) and then take the Lens off from the holder.
A
A
Fig.2-
1
-15-
* Lens should be placed
as the flat surface side
comes to the holder
side.
B
B
Fig.1
Holder
Integrator-In
Fig.2-
2
Advertisement
Table of Contents
