Condenser Lens Adjustment - Sanyo PLV-80 Service Manual

Multimedia projector
Hide thumbs Also See for PLV-80:
Table of Contents

Advertisement

Optical Adjustments

Condenser Lens adjustment

1
Turn the projector on by a state of without FPC cables.
2
Adjust the adjustment base of condenser lens ass'y to make color
uniformity in white.
1) If the shading appears on the left or right of the screen as
shown in Fig.2-1, loosen 2 screws
er, and adjust the slot
using a slot screwdriver.
2) If the shading appears on the top or bottom of the screen as
shown in Fig.2-2, loosen 1 screw
and adjust the slot
using a slot screwdriver
3
A and C
Tighten screws
Note:
The relay lens adjustment must be carried out after completing this
adjustment.
A
with the 2.0mm hex driv-
B
to make color uniformity in green by
C
with the 2.0mm hex driver,
D
to make color uniformity in green by
to fix the Condenser lens unit.
A
Fig.2-
1
Moving of slot B
Fig.2-
2
Moving of Slot D
-21-
White
Slot B
a
A
b
White
C
Slot D
y
x

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plv-80l

Table of Contents