Optical Parts Disassemblies - Sanyo PLV-Z1 Service Manual

Hide thumbs Also See for PLV-Z1:

Table of Contents

■ Optical Parts Disassemblies

Before Taking this procedure, remove Cabinet Top and Main board following to the "Mechanical

Disassemblies".

Disassembly requires a 2.0mm hex wrench and a screwdriver.

PROJECTION LENS REMOVAL

1. Remove the Cabinet Front following to "CABINET -

FRONT REMOVAL" on "Mechanical Disassemblies".

2. Remove four screws to take the Projection Lens with

Cushion Ring off.

INTEGRATOR LENS REMOVAL

1. Remove two screws and pull the Integrator Lens Ass'y

upward.

2. Remove the Stopper and bend four hooks and then

take the Lens off from the Holder.

Note:

Should be placed the lens as the rugged surface side

of it comes to the holder side.

Projection Lens

Lens Holder

Integrator Lens Ass'y

-15-

Cushion Ring

Integrator Lens

Stopper

Fig. 1

Fig. 2

Table of Contents