Firmware Update - Konica Minolta bizhub C35P Service Manual

6. FIRMWARE REWRITING
C. How to write firmware data
1. Turn the power switch ON.
2. Connect the USB memory device to the printer.
3. Call the SERVICE MENU to the display.
4. Select [FIRMWARE UPDATE] and press the Menu/Select key.
A list of firmware data in the USB memory device is displayed.
NOTE
• Before upgrading firmware, use [VIEW INFORMATION] to check that the firmware
data is correct.
5. Select the specific firmware data to be upgraded and press the Menu/Select key.
6. Select [EXECUTE] and press the Menu/Select key.
7. Select [YES] and press the Menu/Select key.
24

FIRMWARE UPDATE

EXIT
UpdateA0VDXXXXXXX
XXXXXXXXXXXXXXX
UpdateA0VDXXXXXXX
VIEW INFORMATION
EXECUTE
CANCEL
UpdateA0VDXXXXXXX
YES
NO
Field Service Ver. 1.0 May 2010
A0VDF2E561DA
A0VDF2E550DA
A0VDF2E551DA