Field Service Ver. 1.0 May 2010
7.3.20
DC power supply fan motor (FM10)
1. Remove the exit cover.
See P.43
2. Remove the operation panel.
See P.44
3. Remove the left cover.
See P.42
4. Remove the rear right cover.
See P.42
5. Remove the upper cover.
See P.44
[1]
8. To reinstall, reverse the order of removal.
7.3.21
Cooling fan motor (FM11)
1. Remove the exit cover.
See P.43
2. Remove the operation panel.
See P.44
3. Remove the left cover.
See P.42
4. Remove the rear right cover.
See P.42
5. Remove the upper cover.
See P.44
[1]
8. To reinstall, reverse the order of removal.
[2]
[3]
A0VDF2C037DA
[2]
[3]
A0VDF2C038DA
7. OTHER MAINTENANCE ITEM
6. Disconnect the connector [1].
7. Unlock the tab [2], and remove the
DC power supply fan motor [3].
6. Disconnect the connector [1].
7. Remove two screws [2], and remove
the cooling fan motor [3].
61