Transfer Power-Simplex Pass; Transfer Power-Manual Duplex - Konica Minolta bizhub C35P Service Manual

Field Service Ver. 1.0 May 2010
10.5.4

TRANSFER POWER-SIMPLEX PASS

A. Use
• Adjust the 2nd image transfer output (ATVC) on the single-sided pages for each media
type.
• To use when the transfer failure at the trailing edge occurs.
B. Procedure
• The default setting is 0.
1. Call [SERVICE MENU] to the display.
2. Select [ALIGNMENT] → [TRANSFER POWER] and press the Menu/Select key.
3. Select [SIMPLEX PASS] and press the Menu/Select key.
4. Select desired media type with the up key /down key
key.
5. Select desired setting value with the up key /down key
key.
<Adjustment instructions>
To increase the ATVC value (in the direction of a foggier image),
decrease the setting value.
To decrease the ATVC value (in the direction of a less foggy image),
increase the setting value.
10.5.5

TRANSFER POWER-MANUAL DUPLEX

A. Use
• Adjust the 2nd image transfer output (ATVC) on the manual duplexed pages for each
media type.
• To use when the transfer failure at the trailing edge occurs.
B. Procedure
• The default setting is 0.
1. Call [SERVICE MENU] to the display.
2. Select [ALIGNMENT] → [TRANSFER POWER] and press the Menu/Select key.
3. Select [MANUAL DUPLEX] and press the Menu/Select key.
4. Select desired media type with the up key /down key
key.
5. Select desired setting value with the up key /down key
key.
<Adjustment instructions>
To increase the ATVC value (in the direction of a foggier image),
decrease the setting value.
To decrease the ATVC value (in the direction of a less foggy image),
increase the setting value.
-8 to +7
and press the Menu/Select
and press the Menu/Select
-8 to +7
and press the Menu/Select
and press the Menu/Select
10. SERVICE MODE
105