Table of Contents
Advertisement
1) Shot mark: Timecode of the scene to be used as the
editing point when editing.
Setting for recording good shot marks on
the LTC-UBIT area on the tape
1
1MENU knob
2MENU ON/OFF switch
3Switch cover
1
Display the SHOT MARKER page of
the MAINTENANCE menu.
M10 SHOT MARKER
LTC UB-MARKER
REC START MARK
SHOT MARKER 1
SHOT MARKER 2
For details on menu operations, see "Basic
menu operations" on page 117.
2
Select LTC UB-MARKER, and press
the MENU knob.
3
Turn the MENU knob to select which
marker to record on LTC-UBIT.
The setting changes in the order of SET y
ALL y OFF.
Item
Contents
SET
Determines whether or not marks
are recorded for the items REC
START MARK, SHOT MARKER
1, and SHOT MARKER 2 which
appear when you select SET.
ALL
Records the recording start mark,
shot mark 1, and shot mark 2 all.
OFF
Does not record any markers.
When you select SET, go to step 4.
2
3
TOP
:
SET
:
OFF
:
OFF
:
OFF
4
Set the mark(s) to be recorded to ON.
1 Turn the MENU knob to move the b
mark to the mark to be set, then press
the MENU knob.
M10 SHOT MARKER
LTC UB-MARKER
REC START MARK
SHOT MARKER 1
SHOT MARKER 2
2 Turn the MENU knob clockwise or
counterclockwise until the desired
setting appears. To record the mark on
the tape, select ON. To not record the
mark, select OFF.
3 Press the MENU knob.
4 To set the remaining marks, repeat
steps 1, 2, and 3.
Recording a shot mark 1
Press the RET button once. On the viewfinder
screen, z and the timecode of the marked point
are displayed for about 3 seconds.
Recording a shot mark 2
Press the RET button twice. On the viewfinder
screen, × and the timecode of the marked point
are displayed for about 3 seconds.
Recording a recording start mark
You can record a recording start mark at the
beginning of the recording.
Using recording start marks enables quick access
to the marked points, for efficient editing.
For details about recording start marker operations,
refer to the manual supplied with your VTR.
You can set whether or not recording start marks
are recorded using the SHOT MARKER page of
the MAINTENANCE menu.
For details about the setting, see "Setting for
recording good shot marks on the LTC-UBIT area on
the tape" on page 67.
TOP
:?
SET
:
OFF
:
OFF
:
ON
Recording
67
Advertisement
Table of Contents
