Adjusting The Viewfinder Focus And Screen - Sony HDW-650 Operation Manual

To reattaching the eyepiece
1
Align the red marks on the eyepiece
locking ring and the viewfinder barrel.
2
Align the red mark on the end of the
eyepiece end with the red marks on the
eyepiece locking ring and the
viewfinder barrel. Then insert the
eyepiece into the viewfinder barrel.
3
Turn the eyepiece locking ring
clockwise until its "LOCK" arrow
points at the red mark on the viewfinder
barrel.
When the eyecup is worn out, replace it with a
new one.
For details of a replacement eyecup, contact a Sony
service representative.
Adjusting the viewfinder focus
and screen
To adjust the viewfinder focus
Turn the diopter adjustment ring until the
viewfinder image is sharpest.
Diopter adjustment ring
To adjust the viewfinder screen
Adjust the brightness, contrast, and peaking of the
viewfinder screen with the controls shown below.
1
PEAKING CONTRAST
ZEBRA TALLY
DISPLAY
ON HIGH
OFF OFF
MOMENT LOW
ASPECT
1PEAKING control
2CONTRAST control
3BRIGHT control
Attaching the Viewfinder
2 3
BRIGHT
33